메인 기능 스탬핑 부품
그 메인 특성 의 스탬핑 부품. 그만큼 스탬핑 부품 주로 포함 금속 또는 비금속 플레이트, 어느 가공 by pressing machines and stamping dies. 그들은 가지고 그의 다음 특성:
(1) 스탬핑 부품 are 생산 with light weight and good rigidity under the premise of small material consumption. After plastic deformation of the sheet, the internal structure of the metal is improved to improve the strength of the stamping parts
(2) 스탬핑 부품 가지고 높은 치수 정확도, 균일 크기 모듈 및 더 나은 호환성. 아니오 추가 처리 is required to meet the assembly and use requirements of the Assembly.
(3) In the stamping process, because the surface materials are not damaged, the stamping parts have good surface quality, smooth and beautiful appearance, which provides a convenient condition for surface treatment such as surface coating, electroplating, phosphating, etc.
1. 접착력 및 스크래치: 기한 to 불량 마찰 재료 및 펀치 또는 금형 부품 또는 금형 표면;
2. Burr: mainly occurs between the cutting die and blanking die, and there will be burrs on the edges between gaps or when the gap is large or small;
3. Line deviation: when the part is formed, the first part is extruded and forms a line in contact with the mold;
4. 볼록 및 오목: 혼합 볼록 및 오목 of 외래 물질 (철, 접착제, 먼지) in uncoiling belt;
5. Zigzag: R corner parts or embossed parts twist and turn due to uneven stress, mismatched pulling ribs or poor control pressure plate;
6. 주름: 기한 to poor adjustment of the pressing slider, low pressing accuracy, improper air pressure adjustment, punch or R part, etc., caused by the edge or R part of the wrinkle.
7. 기타 특정 문제 의 스탬핑 부품: In 매일 생산, 대형 크기 또는 소형 크기 (가능 초과 사양) 펀칭 및 대형 크기 차이 의지 be 만남. In addition to forming convex and concave die design dimensions, processing accuracy and blanking clearance, the following aspects should be considered to solve.
(1) The punching edge is worn, and the tensile stress increase with the increase of the material, and the stamping parts are turned, and the distortion tends to increase. When punching, the punching size will become smaller.
(2) The strong pressure of the material will deform the material plastically, which will cause the punching size to become larger. And reduce the pressure, the punching size will become smaller.
(3) The edge shape of a convex edge. For example, the end repair slope or arc, due to the reduction of blanking force, the punching is not easy to produce material and distortion, so the punching size will become larger. and the punch end is flat (no slope or arc), and the punching size will be relatively small.
문의하기
- 중국 둥관시 다링산진 시다로 신탕두안 79호 3층
- Sales2@cj-metalparts.com
- 플러스 8618007495456
메인 기능 스탬핑 부품
Dec 01, 2022
당신은 또한 좋아할지도 모릅니다
문의 보내기





